Library
My library

+ Add to library

Profile

Lista często zadawanych pytań

Dr.Web for Windows 11.5:

  1. Click on the Dr.Web icon in the notification area (in the lower-right corner of the screen).
  2. Click on the padlock icon (Administrative mode) to allow the application to launch.
  3. Click on the gear icon (Settings), and then click on GeneralSelf-protection.
  4. Toggle off the Block user activity emulation option.

Dr.Web for Windows 12:

  1. Click on the Dr.Web icon in the notification area (in the lower-right corner of the screen).
  2. Select Security Center, and click on the padlock icon (Administrative mode) to allow the settings to be changed.
  3. Click on the gear icon (Settings) in the top-right corner of the installer window, and then click on Self-protection.
  4. Toggle off the Block user activity emulation option.

You can also toggle off this option during the anti-virus installation process in the Installation parameters section — in the Advanced options tab.

Prior to the installation, we strongly recommend doing the following:

  • Install all the critical updates released by Microsoft for your operating system (updates can be downloaded from the Microsoft update site);
  • Use system tools to check the file system and fix problems, if any;
  • Close other running applications.

To run the installation in normal mode, use one of the following:

  • If the installation kit is a single executable file, launch the file.
  • If the installation kit is furnished on a branded disk, insert the disk into your optical drive. If autorun is enabled, the installation procedure will start automatically. If autorun is disabled, launch the autorun.exe file located on the disk. The autorun window will appear.

Then proceed with the following steps:

  • Press Install.

Follow the installation wizard instructions. At any installation step before file copying process is started you can use the two buttons:

  • Press Back to return to the previous step;
  • Press Next to move to the next step;
  • Press Cancel to cancel the installation.

In order to check the version number, right-click on the Dr.Web icon in the notifications area and select About. In the next window, you will see the Dr.Web version number and all the modules versions as well.

When purchasing our anti-virus, you obtain a certificate indicating which product the license you have bought is applied to. So, you need to install the product indicated.

There are two ways to do it:

  1. Disable anti-virus self-protection (right-click on the Dr.Web icon in the notifications area, select Disable self-protection, enter digits from the CAPTCHA and press Disable self-protection), then copy the drweb32.key key file from C:\Program Files\DrWeb (or the anti-virus installation folder) to a removable media. After that, locate the drweb32.key file path during the anti-virus installation the new OS.
  2. Download the latest Dr.Web version from our website and launch the installation. During the installation, enter your serial number; the key will be downloaded and installed automatically.

In this case, you need to download the latest anti-virus distribution file from our website and install it.

In default installation, all the anti-virus package components are automatically installed into C:\Program Files\DrWeb\ folder.

In custom installation, you can specify the list of components to be installed (e.g. you may choose not to install a firewall if you don’t need it), select installation folder and configure update server.

To have this error fixed, you need to download and install an update for Windows, and then restart anti-virus installation.

It is not allowed to install several anti-virus programs on one PC at a time — they will conflict with each other that may considerably slow down you PC or make it completely non-operational. If you have an anti-virus software already installed on your PC, but intend to install a new product from another vendor, then you need to remove the anti-virus program you have, prior to the installation.

If you wish to install another anti-virus program, you do it at your own risk, and become responsible for all the consequences because the consequences of such installation might be unpredictable including inability of your OS to boot as a result of two or more anti-viruses installed on your PC.

If you have not installed the self-protection module, do the following:

  1. Download the latest version of the curing utility Dr.Web CureIt and run a full scan. Cure detected infected objects and delete or move to the qurantine incurable malicious objects.
  2. After that you need to reinstall the anti-virus. Open Add and Remove Programs (Windows 2000 \ XP) or Programs and Features (Windows Vista / 7) in the Control Panel, and remove Dr.Web anti-virus. After rebooting, go to C: \ Program Files \ DrWeb (or another folder into which Dr.Web has been installed) and remove all files and folders, but the license key file drweb32.key.
  3. After that, download the latest distribution of the antivirus program and install it. To register, use the saved key file.

Quarantined files can be deleted by selecting the desired file and clicking Delete. It will remove the file from the quarantine and from the system.

A Dr.Web anti-virus is a set of programs, each of them protects its own section in your computer's defense. Removing or disabling at least one component greatly reduces the reliability of anti-virus protection in general, so we strongly advise you not to disable any of its modules unless absolutely necessary.

To temporarily disable self-protection, right-click on the Dr.Web icon in the system tray and in the context menu select Disable self-protection (if this feature is unavailable, please switch to the Administrative Mode and try again). A window will appear where you'll need to enter numbers from the picture and click Disable self-protection.

Caution! Disabling self-protection is not recommended, activate it again as soon as possible.

Right-click on the Dr.Web icon in the system tray and select Tools–> Quarantine. In the subsequent window select the file and click Restore.

There are several ways to start the scanner.

  • The scanner shortcut (the icon with a spider on the green field) is placed on the desktop during Dr.Web installation. Double-click on the shortcut and the scanner will start.
  • The green spider icon is displayed in the system tray. Right-click on the icon. In the context menu, select Scanner; the scanner will start.
  • Run the scanner via Windows Explorer to scan a specific object (file or folder). Right-click on the file or folder you want to scan. In the context menu, select Scan with Dr.Web (the item with the red spider icon). The Scanner will start immediately and the file will be scanned.
  • Check the specific object (file or folder) you’ve found by dragging it onto the scanner icon or its open window when custom scan is selected.

In respect to infected and incurable objects, the Move action does the following: The file is moved to a special quarantine folder. Furthermore, once moved, the file loses its extension. The virus is literally disarmed and rendered non-operational and, therefore, harmless. Later, you can open the Quarantine Manager and delete the files if you do not need them.

Quarantined viruses are not dangerous because they can't be launched. If you want to permanently delete infected files, clean the quarantine:

  • If you are using Dr.Web for Winidows 5.0 and Dr.Web Security Space 5.0: remove all objects from the infected!!! folder, located in the anti-virus's installation folder.
  • If you are using Dr.Web for Winidows 6.0 and Dr.Web Security Space: right-click on the Dr.Web icon in the system tray and select Tools–> Quarantine. In the subsequent window select the files you want to remove and click Delete.
  • If your anti-virus is Dr.Web CureIt!, remove all objects from the C: \ Documents and Settings \ _your_user_name_ \ DoctorWeb \ Quarantine folder.

Dr.Web SelfPROtect protects the modules, processes, and branches of the registry used by Dr.Web for Windows from outside interference. The outside interference includes incompetent user actions that may render the anti-virus non-operational or make it malfunction as well as actions taken by anti-antiviruses that may terminate anti-virus processes, modify and remove its files and delete Windows Registry branches related to Dr.Web. Disabling the self-defense is not recommended!

The quarantine is a special folder where the anti-virus stores suspicious and infected files. Suspicious files are stored to be later sent to Doctor Web's laboratory for analysis, infected files get into the folder if their removal and curing is impossible for some reason.

  • If you use Dr.Web for Windows 5.0 and Dr.Web Security Space 5.0 the quarantine folder name is infected!!!, It is located in the anti-virus installation folder (default path C: \ Program files \ Drweb).
  • With Dr.Web for Windows 6.0 and Dr.Web Security Space access to the quarantine is only available through the program interface. To access the quarantine, right click on the Dr.Web icon in the system tray and select Tools–> Quarantine.
  • Dr.Web CureIt! placed quarantined objects into C:\Documents and Settings\_Your_user_name_\DoctorWeb\Quarantine.

Infected files are moved to a special storage — Quarantine — from where you can remove the file if necessary, restore it to its original location or send it for analysis in our virus lab.

  • If you use Dr.Web for Windows 5.0 and Dr.Web Security Space 5.0, the quarantine folder name is infected!!!, It is located in the anti-virus installation folder (default path C: \ Program files \ Drweb).
  • With Dr.Web for Windows 6.0 and Dr.Web Security Space access to the quarantine is only available through the program interface. To access the quarantine, right click on the Dr.Web icon in the system tray and select Tools–> Quarantine.
  • Dr.Web CureIt! places quarantined objects into C:\Documents and Settings\_Your_user_name_\DoctorWeb\Quarantine.

To answer this question, you need to understand the difference between viruses and Trojan horses. Typically, a virus adds (appends its code) itself to an infected file so it incorporates its own code and the virus's code. Together they represent a virus-infected file. Most of these files can be cured by the Dr.Web anti-virus. Here we speak about curing files of viruses rather then curing viruses.

A Trojan horse is a complete malicious program. It doesn't inject its code into files but operates as a separate program, that's why it can't be cured but removed. Some Trojan programs compromise various system objects such as the Windows Registry. In this case we can speak about curing the system (but not the Trojan horse), which includes removing the Trojan and restoring the compromised objects to their healthy state.

The utility is not designed to be used as a main Dr.Web software uninstallation tool. Dr.Web Remover utility is a damaged Dr.Web version emergency removal tool. The anti-virus is recommended to be uninstalled with the standard Windows tools.

If the installed version of Dr.Web Anti-virus was damaged for some reasons and cannot be removed in a regular way — please use the Dr.Web Remover emergency removal utility. Run Dr.Web Remover, enter the code from the CAPTCHA (it is necessary in order to confirm that is the user, not application, who attempts to remove antivirus) and press Remove.

Like any other program, Dr.Web Anti-virus can be removed with standard operating system tools:

  • In Windows 2000/XP: From Menu–>Control Panel–>Add/Remove programs.
  • In Windows Vista/7: From Menu–>Control Panel–>Programs and Features.

If you were unable to remove the anti-virus in such a way, please use a special Dr.Web Remover utility, which can be downloaded here.

Dr.Web Remover is intended to be used to delete the results of incorrect/damaged installations of Dr.Web for Windows. The supported versions are 4.33, 4.44, 5.0, 6.0, 7.0, and 8.0. The utility can also be used with the same versions of Dr.Web Enterprise Suite client software when standard removal tools are not available or do not work.

Try running SpIDer Gate with the -dbg: 2 parameter. To do this, click Start-> Run, type in the string provided below:

"C:\Program Files\DrWeb\spidergate.exe" –dbg:2

Click Ok.
If the problem persists, please contact the technical support service.

No, SpIDer Gate is an HTTP-monitor. It performs the following tasks:

  • Scan incoming and outgoing HTTP-traffic
  • Intercept all HTTP-connections
  • Filter Data
  • Block loading infected pages automatically in any browser
  • Scan archived files
  • Protect from phishing and other dangerous online resources.

At the same time the firewall protects your PC or network from unauthorized access.

Thus, SpIDer Gate and the firewall must operate simultaneously on your computer to protect your system against viruses and network attacks.

No. SpIDer Gate operates independently of the programs that use the Internet (including browsers).

Dr.Web anti-virus engine is so fast that SpIDer Gate won’t delay loading of web-pages or slow-down file transfers.

For version 5.0:

  1. Increase log file size up to 5 Megabytes. Right-click on the Dr.Web icon in the notifications area, select SpIDer Gate–>Settings, in the next window proceed to the Log tab and modify the File size limit field value.
  2. Right-click on the Dr.Web icon in the notifications area and select SpIDer Gate ->Disable.
  3. Press Start–>Run, copy one of the strings below to the Run field and launch SpIDer Gate:
    • "C:\Program Files\DrWeb\spidergate.exe" -dbg — enable verbose logging,
    • "C:\Program Files\DrWeb\spidergate.exe" -dbg -dbg — debug logging.

Version 6.0

Right-click on the Dr.Web icon in the notifications area and select SpIDer Gate–>Settings from the list (if this item is unavailable, you should first switch to the Administrator mode). In the next window, open the Log section and use the slider to set the Extended mode. Press Ok to confirm the changes made.

SpIDer Gate

Further, if required, you can reproduce the problem that must be analysed using the extended report. Please keep in mind that the Debug log is not always required because redundant information might complicate troubleshooting.

It is not recommended to disable the SpIDer Gate HTTP monitor because nowadays a lot of malware is distributed via infected websites. There are many script viruses and exploits that can cause harm to the system before they are saved to your hard drive and, consequently, detected by the SpIDer Guard® file monitor.

If disabling HTTP monitor is still necessary, right-click on the Dr.Web icon and in the next menu, select SpIDer Gate –> Disable. When anti-virus self-protection screen appears, type digits from the picture into the string and click Disable SpIDer Gate.

Right-click on the Dr.Web icon in the system tray and select SpIDer Gate-> Disable in the context menu.

Caution! It is not recommended to disable the HTTP-monitor SpIDer Gate because nowadays a lot of malware is distributed via infected web sites. There are many script viruses and exploits that can harm the system before they are saved to your hard drive and, consequently, detected by the file monitor SpIDer Guard.

Since SpIDer Gate utilizes the Dr.Web engine and databases, it is updated automatically along with other anti-virus modules.

As other modules of the program Dr.Web, SpIDer Gate features the same anti-virus engine and uses the same virus databases and therefore is updated along with other modules.

The red icon indicates that SpIDer Gate is disabled. To activate it, right click on the Dr.Web icon in the notification area. In the menu, hover over the SpIDer Gate item and in the drop-down list select Enable.

If the icon remains red, you have two options:

  • Application error – in this case you need to contact the Technical support service.
  • Your license does not cover SpIDer Gate. In this case, it is recommended to remove the component: Go to Start-> Settings-> Control Panel-> Add and Remove Programs, find the Dr.Web anti-virus on the list, click Modify and follow the wizard's instructions to disable this component.

One of SpIDer Gate’s tasks is to inform users that visiting some websites is dangerous or undesirable, for reasons that include the presence of “pirated” content. Dr.Web informs users about such websites because they are accompanied by malicious programs. Websites are included in the so-called Dr.Web “anti-piracy” database only on the basis of allegations made by content copyright holders. Each allegation is verified by Doctor Web’s lawyers before the decision is made to include the corresponding URL in the database. When users receive SpIDer Gate notifications concerning the undesirability of visiting pirated websites, they are getting objective, legally considered information about intellectual property infringement. Thus, Doctor Web helps users of its products:

  • avoid becoming the victims of criminals, who for their own selfish ends use others’ works and trademarks, and the fruits of others’ intellectual labours, for illegal purposes;
  • avoid potential criminal indictment for downloading, using, and further distributing pirated content;
  • protect PCs against infections occurring as a result of downloading unlicensed content that is accompanied by malicious programs.

Users make their own decisions as to whether it is worth visiting the websites they have been notified about. The SpIDer Gate component can be enabled or disabled at their discretion.

The unique Dr.Web anti-virus engine allows SpIDer Gate to scan traffic so quickly that you will never notice any delay when viewing web pages and downloading files from the Internet.

If you believe that SpIDer Gate has mistakenly blocked a respected site, please let us know through the form on our website.

If you need to access a suspicious site, right click on the Dr.Web icon in the system tray and in the context menu select SpIDer Gate-> Settings. Clear the Block known source check box and press Ok.

Caution! Disabling this option is not recommended, because pages from all sites, including potentially dangerous ones will be loaded without a corresponding warning.

SpIDer Gate's log file name is spidergate.log. The file is located in the C:\Documents and Settings\Your_user_name\DoctorWeb folder.

SpIDer Gate is compatible with all web-browsers.

Dr.Web anti-virus engine is so fast that SpIDer Gate won’t delay loading of web-pages or slow-down file transfers.

The Speed balance option allows you to adjust the amount of CPU time utilized to scan Internet traffic. The higher the scanning priority, the more CPU resources it will use, but it will help maintain high speed connectivity. Low priority results in low CPU load and slower network communication speed. Changing the default value usually is not required.

Add the site's address onto the white list, or if you are sure that the site is blocked by mistake, report the false positive to Doctor Web.

Send links to web-site mistakenly rated by the module as undesirable to Doctor Web's laboratory via the web-form on our website.

Right-click on the Dr.Web icon in the notification area and select Parental Control → Settings. Enter the password and select Allow access to all sites. In the Local Access tab, select Allow and Unlimited in the corresponding sections. Click Apply to save the changes.

Caution! Disabling Parental control will allow access to all resources on the Internet, LAN and the PC.

There is no way to recover a Parental control access password. The only solution is to import a new password into the registry from a special file.

  1. Use the download link to obtain the file
  2. Disable the anti-virus's self-protection
  3. Double-click on the downloaded file and agree to modify the registry
  4. Enable self-protection
  5. Now your password is "drweb" (without the quotes), do not forget to change it in the Parental control settings.

Right-click on the Dr.Web icon in the notification area and select Parental Control → Settings. If this is the first launch of the Parental control module, you will need to set a password for it. Then in the subsequent window select what you want to block and then click Apply.

If the password for parental control is not specified, each time you open parental control settings, you will be prompted to set a password. It is Recommended that you set a password right away to prevent unauthorized access to these settings. If no password is required, click Cancel.

If upon activating the Parental control you receive the message "Unable to find a key file", it means that your license does not cover the Parental control. In this case, it is recommended to remove the component: Go to Start–> Settings–> Control Panel–> Add and Remove Programs, find the Dr.Web anti-virus on the list, click Modify and follow the wizard's instructions to disable this component.

Use the local access settings to restrict access to resources on your computer - files and folders. In addition, it is possible to prohibit the use of removable storage media and access to the LAN. By restricting access to such resources you can avoid damaging or removing sensitive data by a third party and prevent unauthorized access to confidential information.

The Parental control module allows you to restrict users' access to certain sites on the Internet, local files and folders, local network resources. An administrator can manually configure a list of banned sites or take advantage of the constantly updated thematic lists provided by Doctor Web.

Local access protection and the URL filter are parental control features disabled by default. You need to activate them manually by setting the parental control operation mode and access password in its settings.

The Parental control module can restrict acces to any specific sites or web-pages, as well as to all known sites containing information on certain subjects (such as sites about drugs or weapons, sites of paid on-line games, etc.). A list of specific websites to be blocked is set up by the user; both individual addresses and keywords found in URLs can be specified in this block list. Blocking websites by subject is carried out automatically using the lists, updated regularly by Doctor Web.

If you set a password for accessing the Parental Control, only the computer's administrator will be able to do so after entering the password. If no password is set, then any user with administrative privileges will be able to change the settings.

Virus databases do indeed get larger with each update. But Dr.Web solutions use the most cutting-edge anti-virus database format so that as the virus databases get bigger, scan speed is not reduced.

Moreover, because the latest technologies are applied to Dr.Web solutions, the size of the virus databases can be reduced. This is because they exclude entries containing information about malicious programs that are automatically detected with the help of the newest technologies.

Doctor Web strives to release Dr.Web component updates, especially critical ones, as quickly as possible. After all, the reliability of the protection directly depends on the anti-virus’s ability to intercept and cure the latest threats and still operate error free. Experience shows that for each individual product, updates that require a reboot are being released no more than once or twice a month, the only exception to this being recently released program versions and those under active development.

First do the following:

  • Make sure that your computer is connected to the Internet.
  • If you are using a firewall, go into its settings and allow the drwupsrv.exe update module, located in the folder containing the installed Dr.Web software, to access the Internet.
  • If you access the Internet through a proxy server that requires authentication with a username and password, go to the settings and specify the proxy server’s address and port, and the username and password for it. To do this, right-click on the Dr.Web icon in the notification area, and select Tools –> Settings. In the next window, go to the Proxy server tab and configure the proxy server settings.

If after trying the above, you are still experiencing difficulties, please contact the Doctor Web technical support service and describe in detail how your computer connects to the Internet (note: if a proxy server is involved, please specify whether authentication is required, and whether your browser or Dr.Web update module is configured to be used via the proxy server).

When an Internet connection is present, the anti-virus updates every 30 minutes by default (this is the most optimal setting).

When required, you can change this setting by doing the following: right-click on the Dr.Web icon located in the bottom-right corner of the system tray. Then, in the context menu, select Tools → Settings and go to the Updating tab.

Alternatively, you can update the anti-virus manually by right-clicking on the Dr.Web icon in the bottom-right corner of the system tray, and then selecting Updating in the context menu.

No, that’s not true. When you buy the anti-virus, you are paying not only for the program itself, but also for the right to get anti-virus database and module updates as well as the opportunity to contact the technical support service while your license is valid. Nobody will ever come after you for additional money! Proof of this can be found in the Dr.Web license agreement which you are invited to read before you install the anti-virus. Doctor Web assumes a number of obligations and guarantees the following:

‘Throughout the entire software usage period, the User is granted the right to receive through the Internet virus database updates as well as upgrades of the software modules as they are made available by the Rights Holder’.

The Dr.Web license agreement is a legal document that guarantees your rights as a consumer.

In the window that notifies users that a reboot is required, you can choose when you want the system rebooted. You can choose to do it now or postpone it until a time convenient for you.

Both are aimed at keeping the anti-virus current to protect a computer against any and all threats, including the latest ones. The difference is that when only the virus databases are updated, you don’t need to reboot the system, but when the anti-virus components are updated, rebooting may often be necessary. We strongly recommend that you act on Dr.Web reboot notifications related to component updates because out-of-sequence updating may lead to a weakening of protection.

Just one Dr.Web database entry can lead to the detection of tens, or hundreds, or sometimes even thousands of similar viruses.

Moreover, the presence of Origins Tracing™ and structural entropy analysis in the Dr.Web anti-virus makes it possible to detect malicious programs that are so new they have yet to undergo analysis in the Doctor Web anti-virus laboratory.

The smaller number of virus entries (compared to some other anti-virus programs) even makes it possible to detect unknown viruses (i.e., those not in the virus database) with a high degree of certainty. These are viruses that will be created on the basis of existing viruses.

How do users benefit from the small size of the virus database and the fewer number of entries in it?

  • Hard drive space is conserved
  • RAM is conserved
  • Less Internet traffic is used when updates are downloaded
  • The virus database can be downloaded at high speed, and it can operate quickly when analysing viruses
  • Future viruses, those that will be created in the future by modifying existing viruses, can be detected

Thus, the fundamental difference between the Dr.Web virus databases and the virus databases of other anti-virus programs is that with its fewer number of database entries, the Dr.Web database allows as many (or even more) viruses and malicious programs to be detected.

Hundreds of thousands of new viruses appear DAILY — and correspondingly, tens of thousands appear every hour. The overwhelming majority of them are modifications—brothers and sisters of existing viruses. Yes, the Dr.Web heuristic analyser and the Dr.Web behavioural analyser really do make it possible to detect with a high degree of probability that a file has been infected or is a Trojan itself. But “probably infected” does not mean “infected for sure”! This file will be declared a virus only after its virus signature has been added to the Dr.Web virus database.

But no anti-virus software vendor will ever guarantee you that today won’t be the day that somebody writes a brand new virus that can’t be detected by even the most perfect heuristic analyser.

As a rule, malicious programs reach their victims at the same time they reach the Doctor Web anti-virus laboratory for analysis, and in the case of the newest malicious programs (those not yet detected by any available mechanism), anti-virus analysts need time to develop and test a “cure”. Frequent updating makes it possible to minimise the time it takes for potential victims of criminal attacks to get hold of updates. Often ‘cures’ for malicious files are available, but have not yet been downloaded.

Unlike its competitors, Doctor Web’s principled position is to release updates as frequently as possible so as to minimise the time period during which new threats can pose a danger.

That is why the anti-virus databases need to be updated every time the computer is connected to the Internet or as frequently as possible if the connection is continuous.

Rebooting is needed so that the updated Dr.Web drivers work properly with the operating system. Our competitors’ anti-virus solutions are updated in the same manner.

In order to launch full scan, please use the Task scheduler.

Windows XP:

Open the Windows task scheduler (Start->Control panel->Assigned tasks). Find the Dr.Web Daily Scan task pre-installed during installation and open it to edit. In the Task tab, check Enabled. In the Schedule tab, specify scan frequency and time you need. Press Ok to apply the settings. Enter user name and password upon the operating system request.

Windows Vista/7:

In order to edit a task pre-installed during the anti-virus installation, right-click on the Dr.Web icon in the notifications area and select Tools->Scheduler. In the next window, select the Drweb Daily Scan task, which is disabled by default. You should enable it (by right-clicking the task and selecting Enable option). In the Triggers tab, edit launch time and frequency.

Quick scan of the critical system objects with the anti-virus scanner is launched automatically as the program starts. It is required to find out if any viruses exist in the system. After the scan is complete, two right windows indicate numbers. The left one shows the number of viruses found on your PC, while the right one — the number of RAM objects and files scanned with the anti-virus scanner.

The Move action in respect to infected and incurable objects means the following: an object is moved to a special directory specified in the Move to field (by default, it is the infected.!!! subdirectory of the Dr.Web installation directory) and accessible even after the scan is over. Furthermore, after having been moved, the file loses its extension. Such actions mean that the virus is actually “disarmed”, rendered incapable and, therefore, absolutely safe.

Dr.Web scanner for Windows either scans files at the user’s command or on the schedule specified in the Scheduler. Not all the files are checked, but only those specified in the scanner settings instead. By default, files are checked by format — i.e., files in archives, packed and e-mail files, and RAM and all the autorun objects as well. You may choose to scan disks, folders, scan by file types, by preset mask, or scan all the files. To view current scanner settings, go to the program main window menu bar and select Settings–>Modify settings.

To move automatically all messages marked as spam by Dr.Web Anti-spam into definite mail folder in your mail client, do the following.

  1. In SpIDer Mail menu on the Windows Task Panel choose “Settings” – the SpIDer Mail “Settings” window will appear. Press the “Advanced…” button. The “SpIDer Mail® Spam Settings” window will open. Check the “Add prefix to the subjects of the spam messages” box. Input any word or combination of symbols in the field below it. This will be the prefix Dr.Web Anti-spam will add to subjects of messages marked as spam.
  2. In the mail client you use, make a new folder for spam. Make the rule for this folder so that all the spam messages with the prefix you specified in the “Add prefix to the subjects of the spam messages” filed are placed there automatically.

Incoming mail filtering is processed by SpIDer Mail, one of Dr.Web modules. The following steps describe how to activate the spam filter:

  • In SpIDer Mail menu on the Windows Task Panel choose “Settings” – the SpIDer Mail “Settings” window will appear.
  • In the “Scan” pane of the SpIDer Mail “Settings” window enable the “Check for the spam” checkbox and press OK to save the changes made; then close SpIDer Mail “Settings” window.

After you’ve activated your spam filter, SpIDer Mail with Vade Retro anti-spam engine integrated into it starts filtering all your incoming mail on POP3 and IMAP4 protocols.

At first all spam messages were of Latin origin and spam-filters’ developers, represented for the most part by Western companies, were aimed at filtering these ones only. Later on spammers switched into Cyrillic, too. But since the bulk of spam is still in Latin, there are some difficulties to filter Cyrillic spam.

To save your Cyrillic correspondence from being filtered as spam without a prior analysis, check the “Allow Cyrillic texts” box. Otherwise such e-mails are likely to be marked as spam. “Allow Chinese, Japanese, Korean text” option works the same way.

To have all the messages marked with Dr.Web spam filter automatically moved to a specific folder — let's call it Spam, for example, — follow the below steps:

  1. Right-click on the Dr.Web icon in the notifications area and select SpIDer Mail–>Settings. Go to the Anti-spam tab, and check the box next to Add a prefix to the Subject field of e-mails containing spam. In the field below, enter any word or letter combination you like — that's what will be a prefix Dr.Web spam filter will add to the subjects of messages specified to be a spam.
  2. In your e-mail client, create a folder for spam filtering and configure rule for it so that messages having a prefix you have entered to the Add a prefix to the Subject field of e-mails containing spam be placed into it automatically.

Below are detailed steps on how to set up rules for various e-mail clients. It is assumed that the Anti-spam is configured to mark an incoming spam with the [SPAM] prefix. If you chose an alternative prefix, use it in accordance with this manual...

Microsoft Outlook Express 6

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New Folder...";
    • enter the Spam folder name, and click "OK".
  2. Set a filter rule for messages marked as spam:
    • in the menu, select "Tools" - "Rules for messages" - "Mail ...";
    • in the first list, check the "Search for messages containing specific words in the "Subject" field;
    • in the second list, check the "Move to a specified folder";
    • in the "Rule description", click on the "containing specific words";
    • enter the [SPAM] key word, and press "Add", then "OK";
    • in the "Rule description", click on the "specified";
    • select the "Spam" folder created in step 1, and press "OK";
    • in the "Rule name", type "Spam filtering", and press "OK" twice.

Microsoft Office Outlook 2003:

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New Folder...";
    • enter the Spam folder name, and click "OK".
  2. Set a filter rule for messages marked as spam:
    • in the menu, select "Service" - "Rules and alerts...";
    • Go to the "E-mail rules" tab;
    • click on "New...";
    • select "Create a new rule";
    • in Step 1, select the "Check messages upon receipt", then click "Next";
    • in Step 1, select "containing in the "Subject" field;
    • in Step 2, click on "";
    • in the upper field, enter [SPAM], and press "Add", then "OK" and "Next";
    • in Step 1, select "move them to the folder";
    • in Step 2, click on "";
    • select the "Spam" folder created in step 1, and press "OK", then "Next" twice;
    • in Step 1, specify the "Spam Filtering" rule name, and click "Finish", then "OK".

Microsoft Office Outlook 2007:

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New Folder...";
    • enter the "Spam" folder name, then in the "Folder content" list, select "elements such as Mail"; in the "Place folder into..." tree, choose a location where the "Spam" folder will be stored.
  2. Set a filter rule for messages marked as spam:
    • in the menu, select "Service" - "Rules and alerts...";
    • Go to the "E-mail rules" tab;
    • click on "New...";
    • select "Move all messages containing specific words in the subject field to folder", and click "Next";
    • in Step 1, select "containing in the "Subject" field";
    • in Step 2, click on "";
    • in the upper field, enter [SPAM], and press "Add", then "OK" and "Next";
    • in Step 1, select "move them to the folder";
    • in Step 2, click on "";
    • select the "Spam" folder created in step 1, and press "OK", then "Next" twice;
    • in Step 1, specify the "Spam Filtering" rule name, and click "Finish", then "OK".

Windows Mail 6 (Windows Vista):

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New Folder...";
    • enter the "Spam" folder name; in the "Select the folder in which a new folder will be created" tree, select a location where the "Spam" folder wil be stored.
  2. Set a filter rule for messages marked as spam:
    • in the menu, select "Service" - "Message rules " - "Mail...";
    • click on "New...";
    • in the "1. Select conditions for this rule" list , flag the "Search for messages containing specific words in the "Subject" field";
    • in the "2. Select actions for this rule" list, flag the "Move to the specified folder";
    • in the "3. Rule Description" field, click on "containing specific words";
    • in the "Enter the keywords" dialog box, type [SPAM] in the "Enter keywords or sentence and click" Add"" field, press "Add", then "OK";
    • in the "3. Rule Description" field, click on "specified";
    • in the next "Move" window, select the "Spam" folder created in step 1, and press "OK";
    • in the "4. Rule name" field, type "Spam Filtering" and click "OK" twice.

Ritlabs The Bat! 4

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New" - "New Folder...";
    • enter the Spam folder name, and click "OK".
  2. Set a filter rule for messages marked by anti-spam as spam:
    • right-click on the account name, and in the context menu select "Inbox Assistant settings...";
    • right-click on the "Incoming mail", and in the context menu, select "New rule";
    • in the "Name" field, enter "Spam filter";
    • click on "Sender" and choose the "Subject" line from the drop-down list;
    • enter [SPAM] into the field after the word "containing"
    • under the "Actions" list, click "Add";
    • in the drop-down list, select the "Move message to folder";
    • in the folder tree, select the "Spam" folder created in step 1, and click "OK" twice.

Mozilla Thunderbird 2.0

  1. Create a new folder into which spam will be moved:
    • right-click on the account name, and in the context menu select "New Folder...";
    • enter the Spam folder name, and click "OK".
  2. Set a filter rule for messages marked by anti-spam as spam:
    • select the account name in the tree of accounts and folders;
    • in the menu, select "Tools" - "Message Filters...";
    • press "Create...";
    • in the "Filter name" field, enter "Spam filter";
    • in the list below, sequentially select "Subject", then "contains" from the drop-down lists; in the right-hand field, enter [SPAM];
    • from the drop-down lists in the list far below, sequentially select "Move message to...", and in the next box, select the "Spam" folder created in step 1, then press "OK";
    • close the "Message filters" window.

Whitelists and Blacklists contain mail addresses you either trust or not.

  • If the sender’s e-mail address is added to the Whitelist, these messages are not filtered. However, if the sender and the receiver share the same domain name e-mail addresses and this domain name is enlisted in the Whitelist with the “*” symbol, it is filtered for spam.
  • All messages enlisted in Blacklist are marked as spam without additional analysis.

Both lists settings should be fill in one after another, parted by “;”. The “*” sign can be used as a part of e-mail address. For example, *@domain.org passes for all addresses with “domain.org” domain name.

In case some messages are falsely filtered, they should be forwarded as attachments to special addresses for analysis and correction of spam-filtering techniques.

  • Messages, falsely marked as spam , should be forwarded as attachments to nonspam@drweb.com
  • Messages, falsely marked as non-spam , should be forwarded as attachments to spam@drweb.com.
  • To make it short, let’s apply “spam” name to all unsolicited e-mails. The bulk of it comprises advertisements offering different goods and services.
  • The most dangerous among spam messages are phishing, pharming and scamming ones. Nigerian scams, lottery and casino scams, fraudulent messages from banks and credit organizations are characteristic of them.
  • Next come black political and economic PR scams and the so-called “letters of happiness”.
  • There is also a technical spam, or bounce messages, generated by mail servers in reply to undelivered message, whether you did send one or not. Such e-mails might emerge as a result of mail server poor work or virus activity, of some e-mail worm, for instance.

If you install a Dr.Web package that includes the firewall, you will be prompted to deactivate the Windows firewall. The Windows firewall must be disabled, doing otherwise will result in numerous conflicts that can cause errors or an OS crash.

Neither it is recommended to enable the Windows firewall while the Dr.Web firewall is working.

Right-click on the Dr.Web icon in the notification area. In the menu, hover over the Firewall item and in the drop-down list, select Settings. Click the Application tab.

To create an application rule, click Create. In the opened window, specify the path to the executable file for the program for which you are creating the rule, and select

  1. the rule type for launching network applications:
    • Allow — to allow the application to launch processes.
    • Block — to block the application from launching processes.
    • Not configured — to customize the selected firewall operating mode for this application.
  2. and the rule type for accessing network resources:
    • Allow all — the application will be permitted to access the network.
    • Block all — the application will be blocked from accessing the network.
    • Custom — access will be determined by the parameters specified.
    • Not configured — to customize the selected firewall operating mode for this application.

You do not need to configure rules manually if the firewall is operating in the training mode — it is easier to configure access for each application right from the firewall notification window when it attempts to connect to the network for the first time.

You can't disable automatic startup for the firewall with standard tools available in the system.. However, you can disable temporarily various anti-virus modules including the firewall at any moment. Right click on the Dr.Web icon in the system tray and select Firewall-> Disable in the context menu.

Note: If the Disable item is not available in the menu, switch to the Administrative mode.

Dr.Web Firewall in the real time mode creates rules for applications running in the system but are not on its list. Therefore, you must create rules for such applications when they attempt to connect to the network for the first time. A connection request is issued for specific ports and protocols utilized by the application. You can allow all the requested connections, a connection only for a specific protocol and port, or block the connection. Once the rule is created, the firewall handles requests according to the rule and no longer gives out messages regarding application's network activity to the user.

The predefined database contains rules for the most popular programs, as well as all Windows system services and applications. The database is updated on a regular basis.

For more information see the video tutorial on configuring the Dr.Web firewall.

Dr.Web Firewall has four operating modes:

  • Allow unknown connections — all unknown connections are allowed. Protection is not active.
  • Training mode (create rules for known applications automatically) — learning mode. Rules for known applications are created automatically. The user will be prompted to choose what action to take with all unknown connections.
  • Interactive mode — learning mode. When the operating system or an application attempts to connect to a network, the firewall will prompt the user to choose an action.
  • Block unknown connections — all unknown connections will be blocked without prompting the user.

Yes, you can. In order to disable SpIDer Guard, right-click on the Dr.Web icon in the notifications area and select SpIDer Guard–>Disable.

In order to exclude a program or file from the SpIDer Guard scan, right-click on the Dr.Web icon in the notifications area and select SpIDer Guard–>Settings. In the next window, proceed to the Exclusions tab, press the Browse button to select the folder where the program to be excluded from the scan is installed, and press Add.

Should it become necessary to exclude a folder or file while the Dr.Web for Windows Scanner is running — select Settings–>Modify settings in the scanner menu. You may add a folder in the Scan–>Excluded paths list tab, and a certain file in the Excluded files list, then you need to press Add.

Anti-virus guard is loaded into RAM and checks files being created or modified on the hard disk and all the files being opened on network disks and removable media “on the fly”.

Besides, SpIDer Guard constantly traces running processes activities specific to viruses and blocks those processes upon their detection.

Upon detection of infected objects, SpIDer Guard interacts with them according to the specified settings.

In the Optimal mode the guard scans only files being launched, created and modified on hard disks, removable media and network disks.

Paranoid mode is an enhanced protection mode. When this mode is activated, the guard starts scanning all the files being opened, created or modified on hard disks, removable media and network disks.

Enabling this option allows to block attempts to modify HOSTS system file used by operating system to make an Internet access easier. Modifications of this file may be resulted in virus or any other malicious program activities, and this may cause loss of access to some websites or network resources as a whole.

Enabling this option allows to block automatic launch of autorun.exe-like files from removable media and hard disk drives. This option is used to neutralize autorun-viruses, which are automatically activated when a device is connected to the PC with autorun option enabled.

SpIDer Guard log file is called spiderg3.log and located in the anti-virus installation folder (by default, it is C:\Program Files\DrWeb).

You can test proper operability of anti-virus programs detecting viruses by their signatures with the use of EICAR (European Institute for Computer Anti-Virus Research) file.

This program is specially designed to allow you to see how the installed anti-virus will alert you to the viruses it detected, with no need to expose your PC to danger. Eicar program is not malicious but is specially tuned so that most anti-viruses treat it as a virus. Dr.Web refers to this “virus” as EICAR Test File (Not a Virus!).

To test mail anti-virus performance, you can ask a friend of yours to send you this file, or otherwise try to send it to yourself. If SpIDer Mail detects a virus — that is OK.

If the spam filter misrecognizes some letters, they can be forwarded to special mail addresses for analysis and improving filter performance quality:

  • Send letters misrecognized as a spam to nonspam@drweb.com.
  • Send letters not recognized by mistake as a spam to spam@drweb.com.

Important! You should forward messages as attachment, not as inline.

Powrót

Niczego nie znaleziono